CORTS     English German  
 
 
Home Flat Bearings Engineering Contact Contact #
 
# # #
# # #
# # #
 
Survey Strategy Machining GAPview COILcontrol CADNO CMS
  Machining
Over time, chock and housing surfaces can sustain damage from things like wear, corrosion and hammering. While flat bearings and lubrication are meant to protect against these things, improper flat bearing material choices, unoptimized lubrication or simply years of production can result in surface damage that requires machining to repair. Left uncorrected, damaged mounting surfaces can lead to even more damage as bearings cannot be mounted flush resulting in uneven impact and wear protection, corrosion from water seeping in behind the bearings and an increased or uneven gap which hinders proper lubrication and roll position which dramatically reduces overall production quality.

Corts Engineering has extensive experience in correcting multiple types of problems through precision reconditioning of surfaces. A team of experts use per-site, custom designed milling machinery to accomplish reconditioning tasks quickly and accurately while providing for the levels of precision required to return the mounting surfaces and production window to as good or better than OEM specifications. Corts Engineering's experience runs the gamut of all mill types with the ability to easily adapt to the requirements of each individual site and situation. In addition to surface reconditioning, Corts Engineering also has the ability to provide for the following operations: Machine types 1 - 2

Milling Machine   Magnetic Drilling Machine:
Drilling of Diameters from 10 mm to 40 mm
Thread Cutting from M 5 to M 36

Special Drilling Machine BF 25:
Drilling up to D 50 mm, Mirroring of Flat Surfaces up to D 270 mm
Thread Cutting from M 20 to M 48
Machine types 3 – 8

BF
Drilling up to D 100 mm, Mirroring of Flat Surfaces up to D 380 mm
Thread Cutting from M 20 to M 50 and with specialized thread cutter up to M 100

CCB
Boring to a depth of D 1000 mm (through material)
Boring to a depth of D 800 mm for blind holes
Mirroring of flat surfaces up to D 1000 mm

CCF
Milling of Bearing Surfaces, Contact Surfaces, Grooves, etc.
Standard Widths up to 2500 mm wide x 1400 mm long
Special Widths up to 2500 mm wide x 2300 mm long

ACF 5000
Milling of Rolling Mill Stands, Presses, etc., including use of two independent milling units simultaneously
Width ca. 2000 mm x Height ca. 5000 mm

MHS
External Honing or External Surface Grinding from D 100mm to 500mm
For special circumstances internal surfaces are also possible.

BS
Core Sawing and Cutting Technology in Steel
Through new developments for this market we have practically unlimited possibilities, and with extremely fine cutting precision.

Larger projects in terms of scope and dimensions can also be offered upon request.



 
# # #
#
Disclaimer          2008© +49 (0)2191 8 85 80        contact@cortsconnect.com
#
# # #
# # #
# # #